rbharol
08-24 12:18 PM
Master's and higher, outside US has to be in the STEM fields to qualify.
Good. That means if you have STEM Masters and 3 years US experience then at the time SKIL comes to effect you can file 485 without waiting for PD if 140 was already approved by then. OR can file concurrently.
Good. That means if you have STEM Masters and 3 years US experience then at the time SKIL comes to effect you can file 485 without waiting for PD if 140 was already approved by then. OR can file concurrently.
wallpaper “I MISS YOU SO MUCH!” J:
chadoubra
06-21 01:38 PM
i'm going to make an appointment at the local USCIS office and see if they can help. if they can't, i'll apply for the I-539 straight away. thanks!
rameshvaid
10-16 09:47 PM
Do the right thing. Don't try to find a loophole.
It is possible to convert from B1 to H1, I did the same in 2002 but he can not work till he gets his H1 approved. Simply applying and getting the receipt notice will not make him eligible to work and if he works and is caught he will be deportrd and will not be permitted to come back ever again. He will be under H1 cap also and will have to apply when next year quota opens. You also said that he got all his H1 papers then why he wants to risk it. Best route will be to get H1 stamped in India and come here.
Considering if all that is done, he will still be exploited by his employer if comes on B1 and will have no legal status to work. It takes anywhere between 3 -6 months to get the H1 approved here in US. I assume he is going to work for a desi company or consultant, no American company will encourage this route. He can not get is SS# also till he gets his H1 approved and no question of getting Driver's Licence.
Tell your friend to weigh pros and cons before he decide to come on B1..We all know what we are going through with this broken immigration system..
Good Luck..
RV
It is possible to convert from B1 to H1, I did the same in 2002 but he can not work till he gets his H1 approved. Simply applying and getting the receipt notice will not make him eligible to work and if he works and is caught he will be deportrd and will not be permitted to come back ever again. He will be under H1 cap also and will have to apply when next year quota opens. You also said that he got all his H1 papers then why he wants to risk it. Best route will be to get H1 stamped in India and come here.
Considering if all that is done, he will still be exploited by his employer if comes on B1 and will have no legal status to work. It takes anywhere between 3 -6 months to get the H1 approved here in US. I assume he is going to work for a desi company or consultant, no American company will encourage this route. He can not get is SS# also till he gets his H1 approved and no question of getting Driver's Licence.
Tell your friend to weigh pros and cons before he decide to come on B1..We all know what we are going through with this broken immigration system..
Good Luck..
RV
2011 Hannah Montana-I Miss You-S
jkays94
05-17 07:33 PM
My lawyers and I have attempted to appeal the decision, however our attempt has been futile: our request for appeal has been denied.
The judge presiding over my case will be a United States citizen - it would be like telling a child to kill his/her parent... it simply cannot happen! If I were to sue the United States of America, I would be fighting an uphill battle and risk deportation if I were to lose.
Did you appeal your case to the Board of Immigration Appeals ? Have you sought the intervention of congressional offices ? Congressional offices can ask questions and get answers which you otherwise would never get. What status did you file under ? EB category ? etc
Judges in the US do not discriminate on national origin or immigration status. There have been cases where legal and illegal immigrants convicted of crimes have sued the US and won key phases of their cases even when the cases were appealed. Examples of such are Jogi v. Voges and :
In two recent decisions, the Fourth Circuit reversed lower court rulings that had dismissed law suits filed by two Colombian nationals under the Alien Tort Statute. Both lawsuits sought $2 million in damages on the grounds that the arresting authorities had failed to advise them of their right to consular notification and communication.
While this were not immigration cases, the following case might even demonstrate that Judges are there to uphold the law without fear or favor. In this particular case, a court ordered a US consulate to adjudicate a visa application in 60 days when the applicants had been kept waiting for over 4 years. Mind you the individual was outside the US and still sued and won :
Mandamus Granted Against U.S. Embassy in Moscow in 4-Year Wait for Visa (http://www.aila.org/content/default.aspx?docid=16767)
A District Court in California grants mandamus against the U.S. Embassy in Moscow in an immigrant visa case, finding that 4 years is an unreasonable time for an application to be pending and that a U.S. petitioner has standing to bring a mandamus action against an overseas consulate in a visa application case. Courtesy of Kenneth White.
Finally, I am not an attorney, but I strong suggest pursuing the congressional office route, if need be, use both your congressman(woman) and senator's office to get to the bottom of what appears to be an obvious error. You might want to schedule a meeting with them rather than discuss the issue over the phone and provide all copies of correspondence.
The judge presiding over my case will be a United States citizen - it would be like telling a child to kill his/her parent... it simply cannot happen! If I were to sue the United States of America, I would be fighting an uphill battle and risk deportation if I were to lose.
Did you appeal your case to the Board of Immigration Appeals ? Have you sought the intervention of congressional offices ? Congressional offices can ask questions and get answers which you otherwise would never get. What status did you file under ? EB category ? etc
Judges in the US do not discriminate on national origin or immigration status. There have been cases where legal and illegal immigrants convicted of crimes have sued the US and won key phases of their cases even when the cases were appealed. Examples of such are Jogi v. Voges and :
In two recent decisions, the Fourth Circuit reversed lower court rulings that had dismissed law suits filed by two Colombian nationals under the Alien Tort Statute. Both lawsuits sought $2 million in damages on the grounds that the arresting authorities had failed to advise them of their right to consular notification and communication.
While this were not immigration cases, the following case might even demonstrate that Judges are there to uphold the law without fear or favor. In this particular case, a court ordered a US consulate to adjudicate a visa application in 60 days when the applicants had been kept waiting for over 4 years. Mind you the individual was outside the US and still sued and won :
Mandamus Granted Against U.S. Embassy in Moscow in 4-Year Wait for Visa (http://www.aila.org/content/default.aspx?docid=16767)
A District Court in California grants mandamus against the U.S. Embassy in Moscow in an immigrant visa case, finding that 4 years is an unreasonable time for an application to be pending and that a U.S. petitioner has standing to bring a mandamus action against an overseas consulate in a visa application case. Courtesy of Kenneth White.
Finally, I am not an attorney, but I strong suggest pursuing the congressional office route, if need be, use both your congressman(woman) and senator's office to get to the bottom of what appears to be an obvious error. You might want to schedule a meeting with them rather than discuss the issue over the phone and provide all copies of correspondence.
more...
beautifulMind
10-08 04:43 PM
Came across the same issue and was reffered to a top immigration lawyer who advised as posted by me above
Thanks GCPool. i will probably go with the 485 EAD to be Safe plus logically it makes sense too to sue 485 EAD because once applied for 485 that is your current status...Infact if you contact the school and tell them you are a 485 adjustee they may cancel your EAD OPT
Thanks GCPool. i will probably go with the 485 EAD to be Safe plus logically it makes sense too to sue 485 EAD because once applied for 485 that is your current status...Infact if you contact the school and tell them you are a 485 adjustee they may cancel your EAD OPT
needhelp!
10-22 05:37 PM
I can't do it all by myself...
more...
Desi Unlucky
09-21 02:37 PM
I learnt that for couple of years 1999 and 2000, the unused visas were recaptured by some law passed because of which the no of Visas issued were 39 & 47K the last couple oo years. Isn't it worth trying for recapturing of the unused visas between 2001 & 2005 ?
2010 I miss you babe.
floridasun
01-30 11:55 AM
Pardon my ignorance, I am a little confused here ... For EB2, would it not suffice if the job description explicitly says it requires 5+ years or a Masters + 2 yrs ?
more...
Daisy
05-25 04:35 AM
Fax sent
hair R.I.P. TELL MY BROTHER I MISS
studentoflife
11-08 09:35 PM
As i understand for labor there are only 2 centers right ? one is the atlanta processing center and the other is chicago processing center. Atlanta processing center caters to the state in which my employer has registered his company so i believe he must have sent my application to this processing center only.
http://www.plc.doleta.gov/Processing_Centers.htm
Kindly correct me if i am wrong
StudentOfLife
http://www.plc.doleta.gov/Processing_Centers.htm
Kindly correct me if i am wrong
StudentOfLife
more...
sonu_Aug_2002
07-13 11:39 AM
EAD and AP are benefits due to AOS pending. They are not status by itself. Thus it is optional while filing 485. Once you file 485, you are automatically in legal status to stay in US. H4 status enables you to reentry to US. Similarly, if you loose H4 for some reason ( like in Ur case), AP will allow your spouse to reenter USA.
Please consult an attorney.
yaja, are you sure that she would not need an EAD? what would be her status? AOS case pending? and what would she need to show the officials as documentation for her status within the country? AOS receipt?
You are right about the AP part. If she does not intend to travel, then she would not need an AP; however it is always prudent to keep AP handy, just in case if she needs to travel for emergency reasons. AP takes around 2 to 3 months on an average for approval.
Just want to get this right, for my own knowledge. Please clarify
Please consult an attorney.
yaja, are you sure that she would not need an EAD? what would be her status? AOS case pending? and what would she need to show the officials as documentation for her status within the country? AOS receipt?
You are right about the AP part. If she does not intend to travel, then she would not need an AP; however it is always prudent to keep AP handy, just in case if she needs to travel for emergency reasons. AP takes around 2 to 3 months on an average for approval.
Just want to get this right, for my own knowledge. Please clarify
hot Maillot I miss you! cette
dba9ioracle
08-04 10:26 AM
done
more...
house I MISS YOU MARIAH HOPE YOU
bp333
07-17 08:06 PM
Great job folks. Justice Prevails!
tattoo Hi boy, I miss you so much.
calredd
10-01 01:52 PM
You have to select NO if your VISA has expired more than an year back from your future/present appointment date. Your category will come under new Visa. I am in the same boat as yours and when I see availabity, there is none. Dont know what to do.
more...
pictures how much I miss you until
kiran_k02
12-12 12:33 AM
Hi
My wife need to travel to india urgently. Our visa/I94 expired in Oct. We already applied 485 and is pending.
1) Will there be any issue at airpot as I94 is expired.A xerox copy of 485 receipt is sufficient. There shouldn't be any issue at the airport, I actually did not surrender my I-94 once out of ignorance and gave it to immigration officer on my way back. Anyway, As per your plan, take a copy of I485 receipt.
2) Does she need to travel any path in this case( I heard thru London is issue if visa is expired.France/Amsterdam Etcc..) London, you would need transit visa if you do not have US Visa stamped on your passport (even AP cannot help you here). I don't know about other Airports.
Thanks in advance.
Sree
I am a layman like you, please do your research and talk to your attorney to get final confirmation on these issues.
My wife need to travel to india urgently. Our visa/I94 expired in Oct. We already applied 485 and is pending.
1) Will there be any issue at airpot as I94 is expired.A xerox copy of 485 receipt is sufficient. There shouldn't be any issue at the airport, I actually did not surrender my I-94 once out of ignorance and gave it to immigration officer on my way back. Anyway, As per your plan, take a copy of I485 receipt.
2) Does she need to travel any path in this case( I heard thru London is issue if visa is expired.France/Amsterdam Etcc..) London, you would need transit visa if you do not have US Visa stamped on your passport (even AP cannot help you here). I don't know about other Airports.
Thanks in advance.
Sree
I am a layman like you, please do your research and talk to your attorney to get final confirmation on these issues.
dresses Me singing quot;I Miss You
stuckinmuck
05-25 01:44 AM
The latest version of the CIR bill majorly messes up legal immigrants' lives.
My advice would be to get ready to pack your bags and go back home.
The H1B provisions will make it impossible for you to stay here for long.
I presume you are affected by GC retrogression.
My advice would be to get ready to pack your bags and go back home.
The H1B provisions will make it impossible for you to stay here for long.
I presume you are affected by GC retrogression.
more...
makeup quot;We miss you Dilla.. we will
Coppertop
10-07 04:27 PM
Thanks! *insert extra large grin here*
can a mod please edit the poll as asked by Phat7
can a mod please edit the poll as asked by Phat7
girlfriend 002r050J5Yh.gif I Miss You
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
hairstyles Dear J.Crew,. I miss you.
number30
04-04 02:08 PM
Thanks for your responses. The hospital staff told us it would take 60-90 days to get the SSN. I am stuck until that arrives because only then can I apply for the passport. Any way to get around it?
Call SS office they may give SS on phone or just go and ask them they will give you the number based on which you can apply for passport.
If you apply PIO in person and pick it up in person It will take around week.
Call SS office they may give SS on phone or just go and ask them they will give you the number based on which you can apply for passport.
If you apply PIO in person and pick it up in person It will take around week.
va_labor2002
06-22 03:20 PM
Mr. Vayalar Ravi , Minister of Overseas Indian Affairs,is coming to USA on June 27,2006. He is coming to Washington DC on July 4 to meet Indian Ambassador and Indian community. We should try to meet him personally and explain the problems we are facing. He can talk to US counterparts and do something for us.
Let us organize an event to meet him on July 4. Since It is a holiday, lot of people can meet him and chat with him.
Just an assessment on where we are collectively as a group:
312 new members in June 2006
1100 new members in May 2006
1400 new members in April 2006
1000 new members in March 2006
400 new members in February 2006
600 new members in January 2006
4812 in total membership.
Each one of us should personally get involved in engaging legal immigrants who are affected by the retrogression problem. It is hard to imagine that there are 6-figure number of people in retrogression but there are less than 5-figure number (4812) of people participating in this voluntary effort undertaken by IV.
Please talk to people around you and make them aware of the situation. Creating an account in IV and clicking a button to send web faxes is the least these people can do for their own benefit.
I'm sure that IV core will also become stronger and can gain more leverage during negotiations/lobbying with the appropriate authorities.
On a side note, please have some faith in the strategic decisons made by IV core. I understand that a lot of people here are desperate to see some progress but I personally feel that IV core is on a great strategic path to acheive our goals. In the mean time, if each of us can do our part by recruiting 10 people to join IV by the end of July. We will be stronger and more effective.
Just imagine if our membership is close to 50000 by the end of July, we can take a rally just like the Irish lobby group. Ours will be much legitimate because we are not rallying for illegal immigrants, unlike them. So divert your time resources in the next month in achieving this goal and leave the strategic decision making to IV Core and QGA.
Peace out!
Let us organize an event to meet him on July 4. Since It is a holiday, lot of people can meet him and chat with him.
Just an assessment on where we are collectively as a group:
312 new members in June 2006
1100 new members in May 2006
1400 new members in April 2006
1000 new members in March 2006
400 new members in February 2006
600 new members in January 2006
4812 in total membership.
Each one of us should personally get involved in engaging legal immigrants who are affected by the retrogression problem. It is hard to imagine that there are 6-figure number of people in retrogression but there are less than 5-figure number (4812) of people participating in this voluntary effort undertaken by IV.
Please talk to people around you and make them aware of the situation. Creating an account in IV and clicking a button to send web faxes is the least these people can do for their own benefit.
I'm sure that IV core will also become stronger and can gain more leverage during negotiations/lobbying with the appropriate authorities.
On a side note, please have some faith in the strategic decisons made by IV core. I understand that a lot of people here are desperate to see some progress but I personally feel that IV core is on a great strategic path to acheive our goals. In the mean time, if each of us can do our part by recruiting 10 people to join IV by the end of July. We will be stronger and more effective.
Just imagine if our membership is close to 50000 by the end of July, we can take a rally just like the Irish lobby group. Ours will be much legitimate because we are not rallying for illegal immigrants, unlike them. So divert your time resources in the next month in achieving this goal and leave the strategic decision making to IV Core and QGA.
Peace out!
3ZS
May 12th, 2006, 09:05 PM
Chalk this up to user error. Not sure exactly wat I did but I reset the camera and now it is working like I would expect. Like I said...I was new to SLR :D
Thqnks for the reply...whats interesting is today I called 2 different camera places by me and pretended I was interested in the same kit I have and BOTH told me that the 70s camera body supports the sigma lens' I have - In fact they were putting together a package that included the very seme lens'
Im new to digital SLR's ...but I would think based on this info I have a bad camera body
Thqnks for the reply...whats interesting is today I called 2 different camera places by me and pretended I was interested in the same kit I have and BOTH told me that the 70s camera body supports the sigma lens' I have - In fact they were putting together a package that included the very seme lens'
Im new to digital SLR's ...but I would think based on this info I have a bad camera body